Sign In | Join Free | My remastersys.com
China Anping Changfeng filter material factory logo
Anping Changfeng filter material factory
Hebei Changfeng Filter Material Co., Ltd. One-stop solution for Filter production
Verified Supplier

2 Years

Home > Air Filter Adhesive >

Two Component Solvent Based Pu Adhesive Plastic Bucket Packaged

Anping Changfeng filter material factory
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

Two Component Solvent Based Pu Adhesive Plastic Bucket Packaged

  • 1
  • 2

Brand Name : Chang Feng

Model Number : Chang Feng

Certification : ISO9001

Place of Origin : China, Hebei,

MOQ : 5 / Tons

Price : Negotiable

Payment Terms : L/C, T/T

Supply Ability : 20 Ton/Tons per Month PU glue A black and B for heavy duty air filter production

Delivery Time : 8-10 work days

Packaging Details : mental drum

Product name : Air Filter Adhesive

component proportion ratio : 25%

OEM : OEM Services Provided

Main Raw Material : POLYURETHANE, Polyurethane

Color : orange-red and brown-yellow

Keywords : Hot Melt Adhesive Products

Classification : Double Components Adhesives

Usage : Fiber & Garment, Footwear & Leather, Packing, Construction

Contact Now

AB Polyurethane Two-Component Adhesive Glue 6/1 And 5/1 Hydraulic Oil Filter Glue For Filter


1. Product introduction


Two-component polyurethane adhesive for machine

component proportion ratio is 100:25


2. Parameter table



Two-component polyurethane adhesive for machine

component proportion ratio is 100:25

Material-AMaterial-B
WeightSmall barrel :25KG6.25KG
Big barrel :50KG12.5KG
Physical natureorange-red viscous liquid (color based on your request to configure)brown-yellow liquid
viscosity800-1000MPa.S(25°C)25-50MPa.S(25°C)
density1.02g/ml1.02g/ml
packagePlastic bucket or Tin bucketPlastic bucket ,Tin bucket, Plastic pots
storage1. Material-A and material-B can store up 3-6 months.
2. To appropriate indoor storage above 15°C

3.Production process


1. Material-A should stirred evenly with plastic hand electric drill, material-B can shake, before used.

2. Open the electrocaloric plate temperature to 40-50 degrees, in winter material-A and material-B with a small container to preheat.

3. Wipe the mould with release agent

4. Each 1kg A add 3-6g water, also according to the local environment, such as the humidity in the air, workshop environment.

5. material-A and material-B are mixed at the mixture ratio of 100:40 ratio, then add 40% talcum powder(heavy calcium powder)(100:40:50±5), with 2800 rev / min motor to mix, mixing time determined by the amount of adhesive, per 100g of adhesive is approximately 7-10 seconds .

6. Pour the Mixed liquid into mould, then put the paper element and give a little pressure on it. 8-15 minutes later you can bring the mould down.

4. Method of operation


1.The material must be full rocked after each to the plastic injection machine plastic injection so that the A material mixing evenly.

1.Everytime the plastic injection machine plastic injection A material must be full before the shaking in order to the material until

2.AB material proportioning ratio of A:B=100:25 or 4:1.28°C,you can start operation

3.Material temperature controlled 24°C-28°C appropriate then you can start operation.

4. Must be clean before using the mould release agent (Note:

The new plastic mould can be wiped free)

5 .If A and B is not reaction please measuring A and B ratio.

6. A and B must be sealed to .To avoid the air and water vapor reaction, as a result affecting the effect of colloidal



Product Tags:

Plastic Bucket Packaged two component epoxy

      

25% solvent based pu adhesive

      

solvent based pu adhesive

      
Cheap Two Component Solvent Based Pu Adhesive Plastic Bucket Packaged for sale

Two Component Solvent Based Pu Adhesive Plastic Bucket Packaged Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Anping Changfeng filter material factory
*Subject:
*Message:
Characters Remaining: (0/3000)